Plastic mulch film covers the bed, warms or cools the soil, blocks weeds and holds moisture at the roots. Then it has to hold together until harvest. If you plant a second crop on the same beds, it has to last even longer.
We make mulch film on our Orlando lines, with UV stabilizer sized to the season it has to survive. Degradable and specialty films we do not run are sourced through our partner network, so you still get one supplier and one engineer.
Why Florida Mulch Film Needs the Right UV Package
Florida asks a lot of a mulch film. The sun is strong most of the year and the fall and spring seasons run long. Many vegetable growers plant a second crop on the same plastic to spread the cost of the beds.
Every one of those adds UV exposure. Polyethylene without enough UV stabilizer turns brittle and tears before the season ends.
We blend a UV stabilizer masterbatch into the film and size it to how long the film has to last outdoors. You do not pay for three seasons of protection on a one-season crop. You also do not lose a second crop because the film was built for one. Our UV-resistant film FAQ explains how we size it.
Mulch Film Colors and What Each One Does
Color is a growing decision as much as a packaging one. Here is what each common choice does in the field.
| Mulch film | What it does | Good fit |
|---|---|---|
| Black mulch film | Blocks light to stop weeds and warms the soil | General vegetable production and weed control |
| Clear mulch film | Warms the soil fastest but lets weeds grow underneath | Early plantings and soil solarization |
| White-on-black mulch film | The white side reflects heat while the black side blocks weeds | Hot-season plantings where a cooler bed helps the crop |
| Silver-on-black mulch film | The reflective side cools the bed and can repel some insects | Crops where whiteflies, thrips or aphids cause trouble |
| Biodegradable mulch film | Breaks down in the field instead of being pulled up | Programs that want to skip removal, timed to the crop |
Degradable film needs its breakdown timed to the crop. Too fast and the film fails mid-season. Too slow and you are pulling it up anyway. We make it here or source it through our partners, matched to your planting and harvest dates.
How to Choose Mulch Film Gauge, Width and Resin
Gauge is a balance. Thicker film survives rocks, clods and equipment better, but you pay for every extra mil across every acre.
LLDPE blends add puncture and tear strength. That often lets the film run thinner and still survive the mulch layer and the planting crew.
Width has to cover the bed top, both shoulders and enough extra to tuck into the soil on each side. Measure your bed and how much your mulch layer tucks before you order. A roll that comes up a few inches short can pull loose in the first windy week.
Our article on what agricultural mulch film needs to survive goes deeper on field life and handling.
Mulch Film Made in Orlando for Florida Growers
Most of Florida's vegetable country is a day's drive or less from our plant. That means shorter freight and a plant visit that is a drive, not a flight. When film acts up in the field, you talk to the people who made it.
We ship to growers outside Florida too. The same UV and toughness work applies to greenhouse film, silage covers and bagged soil packaging on our lawn, garden and agricultural film page.
What to Send for a Fast Mulch Film Quote
Seven details let us spec the film to your field.
- The crop, and whether you plan a second crop on the same beds.
- Planting and removal dates, so we can size the UV package.
- Bed width and height, plus how much your mulch layer tucks on each side.
- Color, such as black, white-on-black or silver-on-black.
- The gauge you run now and any trouble you have had with it.
- Your removal plan, pulled up or degradable.
- Acres or rolls per season and where the rolls ship.
Send it through our quote form or call (407) 704-0800. A standard request is typically quoted within one to two business days. Want to see the film before a full run? Ask about samples.