Blown Film Manufacturer in Florida
Prime Film Extrusion is a blown film manufacturer in Orlando, Florida. We make custom polyethylene film on our own lines and source what falls outside them through partner extruders and converters, so one call covers your flexible packaging.
Custom Blown Film Made in Orlando, Florida
Our blown film lines run at 3930 N Orange Blossom Trl Ste B in Orlando. The engineers who help you write the spec are the people who run the film.
Rod Ali, our Lead Process Engineer, built his career on blown film production floors. The person answering your question knows from the floor why a roll curls, bands or seals weak.
3930 N Orange Blossom Trl Ste B, Orlando, FL 32804
(407) 704-0800 · View on Google
Why Buy Blown Film From a Florida Manufacturer
Blown film plants are scarce in Florida. Many Florida and Southeast buyers end up ordering film from plants several states away.
That works until a rush order, a quality question or a spec change needs a fast answer. Here is what buying from a Florida plant changes.
- Shorter freight across the Southeast. Rolls travel fewer miles to Florida, Georgia and the rest of the region.
- A plant visit is a drive. Come see your film run before you commit to a production order.
- A local engineer. Questions about seal, gauge or curl go to someone who can pull a roll and look at it.
- Scheduling that fits your calendar. Being close makes rush orders and production changes easier to plan around.
Blown Film We Make Here and Film We Source
If it runs on our lines, it is made in Orlando. If it is outside our lines, we source it through partner extruders and converters and manage it for you.
Either way you get one quote, one contact and one engineer accountable for the result. This table shows how each product reaches you.
| Product | How we supply it |
|---|---|
| Custom blown film | Made on our Orlando lines |
| Co-extruded multi-layer film | Made on our Orlando lines |
| Custom film structures | Made on our Orlando lines |
| Printed film and rollstock | Film made in Orlando with printing managed by us |
| Lay flat poly tubing | Made on our Orlando lines |
| Poly sheeting | Made on our Orlando lines, with wider jobs sourced through partners |
| Drum and tank liners | Liner film made in Orlando, with large fabricated liners made here or sourced |
| Agricultural mulch film | Made on our Orlando lines, with degradable grades made here or sourced |
| Shrink film | Made here or sourced through our partner network |
| Stretch film and pallet wrap | Made here or sourced through our partner network |
| Finished bags | Through Serv-Pak, our sister company in the same building |
Polyethylene Film Built From the Right Resin
Resin is the first decision on every job. We choose it for what the film has to do, not for what is easiest to run.
- LDPE for clarity, softness and easy sealing.
- LLDPE for puncture and tear strength.
- Metallocene LLDPE for toughness at a lighter gauge.
- HDPE and MDPE for stiffness.
- EVOH and nylon for barrier inside co-extruded film.
Most jobs run on a blend tuned at the extruder. Our Materials Guide compares each resin family in detail.
Blown Film Quality Checked on Every Roll
We watch gauge across the width while the line runs. We test seal strength and dart impact against your spec, and every roll traces back to its resin lot.
A bad roll gets caught on our floor instead of on your packaging line. See how our quality assurance works.
Finished Bags From Serv-Pak, Our Sister Company
Need bags instead of rollstock? Serv-Pak Corporation shares our Orlando building. It has supplied finished bags and packaging to bakeries, schools, food service and retail since 1978.
Film from Prime Film. Bags from Serv-Pak. One building and one conversation.
Orlando Flexible Packaging and Film Shipped Nationwide
Close to Central Florida? Our Orlando flexible packaging manufacturer page covers what being down the road means for your schedule.
Farther away? We ship film to food, industrial, agricultural, chemical and retail buyers across the country. Browse the industries we serve or every capability we run.
Get a Custom Blown Film Quote
Six details get you a real number instead of a round of questions.
- What the film is for and how it gets filled, wrapped or sealed.
- Width or layflat, and whether you want tubing, sheeting or rollstock.
- Gauge in mil, or what the film has to stand up to.
- Resin, barrier or food-contact requirements, if you know them.
- Color, additives and print artwork, if any.
- Yearly volume and delivery location.
Send it through our quote form or call (407) 704-0800. A standard request is typically quoted within one to two business days.